Go Through This Blog Before Purchasing a Pulley Lagging Rubber Sheet!!






A pulley lagging rubber sheet is a special layer of material that is attached to the shell of a conveyor pulley.

One of the primary functions for which many people choose to buy a pulley lagging sheet is because it provides, what many consider to be the best protection to the shell of a conveyor pulley.

It does so by dispensing excess friction, damage due to friction, and also water.

Currently, as a result of the sudden increase in the demand, manufacturers have started producing different types of pulley lagging sheets. 

However, the main 2 kinds are:

·        Rubber lagging (including grooved rubber lagging)

·        Ceramic lagging

Each of these three main variants of pulley lagging has different specifications and purposes for which they are used, and needless to say, they have a lot of purposes.

But before discussing them in detail, let’s first have a quick look at the significance of these sheets!

What is the significance of this kind of rubber sheets?

Slippage of a conveyor belt, if and when it happens can cause severe damage to both the drive pulley and the belt as well.

Repairing of such damages is not only ridiculously expensive, but they also require a lot of time in order to become fully functional again.

Thus, a business organization can lose a huge chunk of cash mainly as a result of this downtime.

For, a conveyor belt to function properly, one has to make sure that they do not have any trace of dust or leakage along the sides of the conveyor belt (one of the main reasons why a conveyor belt skirting rubber is used).

Not only that, but you also have to be sure that the belt has a good enough traction along with the drive pulley so that no incident of slippage ever occurs.

However, the main thing that affects the life span of any conveyor system is whether or not it has been sufficiently equipped for the purpose for which it is intended to be used.

This is because they have to function under many inconvenient conditions, like sludge and rain, which might cause slippage as a result of the friction between the belt and pulleys.

But these mishaps can easily be avoided by using a pulley lagging rubber sheet  which is usually produced using special rubber compounds and provides some of the best water shedding performance along with excellent prevention against material build-up.

Guess that removes all questions related to the significance of these rubber products!!

Now, let’s come back to discussing the different types of rubber pulley lagging, shall we?

   1.     Rubber Pulley Lagging

This is one of the most popular amongst all other pulley lagging.

This is mainly because they are made up of a softer material that offers outstanding traction and also gives excellent protection against wear and tear.

They also provide protection to the pulley shell, and the conveyor belt also experiences a higher rate of friction.

What are the advantages of using these products?

One of the most crucial advantages of using a rubber pulley is that that can be given any shape and grooved into any pattern that you want.

This option gives this pulley lagging sheet optimum flexibility as per the purpose for which you intend to use them.

Yet another advantage, from the view of the consumer, is that these sheets are extremely affordable so that anyone can purchase them.

Are there any drawbacks?

There is only challenge that these products seem unable to overcome, and that is the fact that they have a limited operational life and therefore, needs to be replaced on a regular basis.

   2.     Ceramic pulley lagging

This one is also an extremely common type of pulley lagging and has seen a tremendous rise in popularity.

 

What are the advantages of using this product?

Ceramic is preferred by many because of the fact that it is more hard and resilient than rubber.

It is also highly durable and can, therefore, withstand harsh conditions and resist any kind of abrasive material.

They are generally available in two types – smooth or dimpled, and both of them offer increased friction, grip, reduction in slippage etc.

And what about the drawbacks?

Probably the only issue that plagues the mind of consumers is that ceramic itself is extremely brittle and fragile.

Not only that they are also highly prone to formation of cracks, especially if anything gets caught between the belt and lagging.

In Conclusion…

If you are really serious about providing the best protection for a conveyor belt, look no further than buying a quality pulley lagging sheet.