Oil Suction & Discharge Hose

Photo

Oil Suction & Discharge Hoses are meant for suction & discharge of petroleum products having aromatic hydrocarbon content below 25%. They are ideal for dock and offshore applications as delivered by numerous Oil Suction Hose Manufacturers.

They are provided with first-rate quality of rubber inner lining which is resistant to all types of petroleum and blended products that have aromatic hydrocarbon content maximum up to 25%. The inner lining is essentially smooth in bore, homogeneous in thickness and totally free from air blisters, porosity & splits. Reinforcement of these hoses is given with sturdy plies of rubber impregnated woven textile having helically embedded G.I. wire. A strand of copper wire is planted amidst the reinforcement plies basically to ensure electrical continuity. Its cover is either corrugated or having cloth mark finishes and to safeguard the cover from oil, abrasion and weather, especially selected rubber compound is used.

Conforms to IS: 8189/1996

Nom. Bore	Toler- ance on Nom Bore	Projec -tion to Nipple (Min.)	W.P. 7 kg./cm²		B.P. 28 kg./cm²		W.P. 10 kg./cm²		B.P. 40 kg./cm²		W.P. 15 kg./cm²		B.P. 60 kg./cm²
(mm)	(mm)	(mm)	Rough Bore		Smooth Bore		Rough Bore		Smooth Bore		Rough Bore		Smooth Bore
(mm)	(mm)	(mm)	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M
63	±2.0	115	8.5	0.75	6.5	0.65	10.5	0.85	8.5	0.70	**	**	**	**
75	±2.0	130	10.0	0.85	7.5	0.70	12.0	1.00	10.0	0.85	**	**	**	**
100	±2.0	150	15.0	1.10	11.0	1.0	18.0	1.25	14.0	1.00	**	**	**	**
150	±2.0	150	30.0	1.60	22.5	1.40	36.0	1.85	24.0	1.60	48.0	2.15	31.5	2.00
200	±3.0	165	45.0	2.15	28.5	1.85	51.0	2.50	36.0	2.15	63.0	3.10	43.5	2.80
250	±3.0	180	**	**	**	**	66.0	3.10	49.5	2.70	78.0	3.70	66.0	3.40
300	±3.0	180	**	**	**	**	81.0	3.70	66.0	3.30	93.0	4.00	80.0	4.00

Ideal for Dock and offshore use

Please provide us the following details at the time of inquiry/order:

Nominal Bore size
Type
Working pressure
Degree of Vacuum
External Condition if any
End Connection Details
Roll Length
Total Quantity Required

Make an Inquiry

Overview

Specification

Conforms to IS: 8189/1996

Nom. Bore	Toler- ance on Nom Bore	Projec -tion to Nipple (Min.)	W.P. 7 kg./cm²		B.P. 28 kg./cm²		W.P. 10 kg./cm²		B.P. 40 kg./cm²		W.P. 15 kg./cm²		B.P. 60 kg./cm²
(mm)	(mm)	(mm)	Rough Bore		Smooth Bore		Rough Bore		Smooth Bore		Rough Bore		Smooth Bore
(mm)	(mm)	(mm)	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M	Mass Kg/m	Bend Radius M
63	±2.0	115	8.5	0.75	6.5	0.65	10.5	0.85	8.5	0.70	**	**	**	**
75	±2.0	130	10.0	0.85	7.5	0.70	12.0	1.00	10.0	0.85	**	**	**	**
100	±2.0	150	15.0	1.10	11.0	1.0	18.0	1.25	14.0	1.00	**	**	**	**
150	±2.0	150	30.0	1.60	22.5	1.40	36.0	1.85	24.0	1.60	48.0	2.15	31.5	2.00
200	±3.0	165	45.0	2.15	28.5	1.85	51.0	2.50	36.0	2.15	63.0	3.10	43.5	2.80
250	±3.0	180	**	**	**	**	66.0	3.10	49.5	2.70	78.0	3.70	66.0	3.40
300	±3.0	180	**	**	**	**	81.0	3.70	66.0	3.30	93.0	4.00	80.0	4.00