Sand/Shot Blasting Rubber Hose

Photo

Sand/Shot Blasting Rubber Hoses are meant to convey shots, sand and various other abrasive materials that are utilized in numerous industries. They are industries like steel fabrications, ordnance factories, gas cylinder manufacturing units, heavy engineering industries, manufacturing workshops, etc. Rubber hoses for sand blasting convey such materials at high velocity in all these industries as stated above.

DURATUF Hoses have a common requirement in the Sand/Shot Blasting category for wet & dry sand and even grit blasting, suitable for usage up to a maximum working pressure range of 0.7 to 1.0 MPa. Our hose products under this category conform to the IS: 1677:1968 Standards.

Conforms to the IS: 1677:1968

Duratuf Sand/Shot Blasting Rubber Hoses are available in the following TYPES:

Type	Working Pressure (W.P.)	Bursting Pressure (B.P.)
Type: 1	0.7 MPa	3.5 MPa
Type: 2	1.0 MPa	5.0 MPa

Tensile Strength and Elongation at break of Lining & Cover:

	T.S.(Min)	Elongation at break ( Min)
Lining	14 MPa	400%
Cover	10 MPa	300%

Different Bore sizes of DURATUF SAND / SHOT BLASTING HOSE:

Nom. Bore (mm)	Tolerance on Nom. Bore size	Minimum Thickness of Lining (mm)	Minimum Thickness of cover (mm)
20.0	± 0.75	6.3	1.5
25.0	± 1.25	6.3	1.5
31.5	± 1.25	6.3	1.5
38.0	± 1.50	6.3	1.5
45.0	± 1.50	6.3	1.5
50.0	± 1.50	6.3	1.5

DURATUF Sand/Shot Blasting Rubber Hoses are used for:-

Conveying sand or other abrasive materials at high pressure
Sand/Shot blasting purposes within ordnance factories
Heavy engineering industries
Steel furniture manufacturing workshops

Please provide us the following details at the time of inquiry/order:

Nominal Bore size
Type
Working pressure
End Connection Details
Roll Length
Total Quantity Required

Make an Inquiry

Overview

Specification

Conforms to the IS: 1677:1968

Duratuf Sand/Shot Blasting Rubber Hoses are available in the following TYPES:

Type	Working Pressure (W.P.)	Bursting Pressure (B.P.)
Type: 1	0.7 MPa	3.5 MPa
Type: 2	1.0 MPa	5.0 MPa

Tensile Strength and Elongation at break of Lining & Cover:

	T.S.(Min)	Elongation at break ( Min)
Lining	14 MPa	400%
Cover	10 MPa	300%

Different Bore sizes of DURATUF SAND / SHOT BLASTING HOSE:

Nom. Bore (mm)	Tolerance on Nom. Bore size	Minimum Thickness of Lining (mm)	Minimum Thickness of cover (mm)
20.0	± 0.75	6.3	1.5
25.0	± 1.25	6.3	1.5
31.5	± 1.25	6.3	1.5
38.0	± 1.50	6.3	1.5
45.0	± 1.50	6.3	1.5
50.0	± 1.50	6.3	1.5