Hydraulic Rubber Hoses

Photo

SAE 100 R3 Rubber Hoses are meant to deal with medium pressure oil and fuel lines along with suction and return hoses of hydraulic systems. These hydraulic hoses consist of two plies of plaited textile for protecting their inner tube just in case their outer cover is broken. SAE 100 R3 Rubber Hoses suppliers ensure that the inner tubes in these products are protected without any compromise.

DURATUF SAE 100 R3 Medium Pressure Hydraulic - Hose double braid is ideal for medium pressure fuel and oil lines and even return & suction hoses of hydraulic system.

Two plies of braided textile (rubber compound impregnated) protect the inner tube. The tube is the innermost lining of a hydraulic hose and comes in contact with the fluid being conveyed. The tube and fluid compatibility is most critical. The Tube of our SAE 100R3 hose is made of Nitrile Rubber which has superior oil resistant capability. It won’t react with water or petroleum based hydraulic fluid within an operating temperature of -40⁰ to 100⁰C

The cover of the above hose is that of Neoprene Rubber compound for ensuring the protection of reinforcement of the hose from environment, machines & even from the operators, who may unintentionally damage it. Often, vapour steam at high temperature is directly in contact with the outer rubber cover of the hose. Moreover, it often comes in contact with chemicals & oil as well. Neoprene rubber compound takes care of such state of affairs.

Nominal Bore Size, Working Pressure, Bursting pressure & Minimum Bend Radius

Hose I.D.	Hose O. D.	W.P. (MPa)	B.P. (MPa)	Min. Bend Radius (mm)
(mm)	(mm)	W.P. (MPa)	B.P. (MPa)	Min. Bend Radius (mm)
6.4	14.3	8.6	34.5	76
7.9	17.5	8.3	33.1	102
9.5	19.1	7.8	31.0	102
12.7	23.8	6.9	27.6	127
15.9	27.0	6.0	24.1	140
19.0	31.8	5.2	20.7	152
25.4	38.1	3.9	15.6	203

DURATUF SAE 100 R3 Rubber Hoses are used for conveying:-

Hydraulics oils
Fuel
Lubricating oils
Anti-freeze solutions & water

Please provide us the following details at the time of inquiry/order:

Hose I.D. & O.D.
Bending Radius
Working pressure
Working Temperature
Application
End Connection Details
Length of each SAE 100 R3 Rubber Hose
Total Quantity Required

Make an Inquiry

Overview

DURATUF SAE 100 R3 Medium Pressure Hydraulic - Hose double braid is ideal for medium pressure fuel and oil lines and even return & suction hoses of hydraulic system.

Specification

Nominal Bore Size, Working Pressure, Bursting pressure & Minimum Bend Radius

Hose I.D.	Hose O. D.	W.P. (MPa)	B.P. (MPa)	Min. Bend Radius (mm)
(mm)	(mm)	W.P. (MPa)	B.P. (MPa)	Min. Bend Radius (mm)
6.4	14.3	8.6	34.5	76
7.9	17.5	8.3	33.1	102
9.5	19.1	7.8	31.0	102
12.7	23.8	6.9	27.6	127
15.9	27.0	6.0	24.1	140
19.0	31.8	5.2	20.7	152
25.4	38.1	3.9	15.6	203