Water Delivery Hose

Photo

General Purpose Water Hoses in India are meant to deliver effective services across numerous applications. These are commonly used for water delivery purpose in Railways, Industries, dams, Mines, Horticulture, Irrigation, Fire Fighting, Construction Sites, Car Washing, De-watering etc.

They are provided with superior quality rubber inner lining which is smooth in bore and totally free from air blisters, porosity & splits

Maximum attention is given on the reinforcement of these hoses and it is provided with robust plies of rubber impregnated woven textile or braided superior strength natural/synthetic yarns. The cover finish of these hoses is available with smooth/fluted/cloth mark, totally free from air blisters, porosity and any other visible defects. Most importantly these are resistant to abrasion, ozone, oxidation and weather.

In our hose of this variety the minimum adhesion value between Lining and Reinforcement, between Cover and Reinforcement shall not be less than 1.5Kn/m

These are also available as per Standard specified in ISO/DIN etc.

Available in following types:

Type 1 W.P. of 0.60 MPa & min. B.P. of 1.90 MPa .

Type 2 W.P. of 1.0 MPa & min. B.P. of 3.15 MPa .

Type 3 A & B - W.P. of 2.5 MPa & min. B.P. of 8.00 MPa

Type -3 B has Oil Resistant Cover

DURATUF Hoses are available for the general purpose category at extremely reasonable prices but at top-notch product quality. Our customers can surely be very much satisfied after trying out our products from the hoses category

Conforms to IS: 444/1987 Type 1, 2, 3A & 3B:

Different sizes of GENERAL PURPOSE WATER RUBBER HOSE available with DURATUF

Nom. Bore (mm)	Tolerance on Nom. Bore (mm)	Minimum Thickness of lining (mm)	Minimum Thickness of Cover for Type 1 & Type 2	Minimum Thickness of Cover for Type 3
10.00	± 0.75	1.50	1.0	1.50
12.50	± 0.75	1.50	1.0	1.50
16.00	± 0.75	1.50	1.0	1.50
20.00	+ 0.75 (-) 1.25	1.50	1.0	1.50
25.00	± 1.25	2.00	1.0	-
31.50	± 1.25	2.00	1.0	-
38.00	± 1.50	2.00	1.0	-
45.00	± 1.50	2.50	1.0	-
50.00	± 1.50	2.50	1.0	-
56.00	± 1.50	2.50	1.0	-
63.00	± 1.50	2.50	1.0	-
75.00	± 2.00	2.50	1.0	-
100.00	± 2.00	2.50	1.0	-

Tensile Strength and Elongation at break of Lining and Cover:

Hose Type	T.S.(minimum)	Elongation at break ( Min)
1	5.0 MPa	250%
2	5.0 MPa	250%
3	7.0 MPa	300%

Tolerance on any hose length: ± 1%

DURATUF General Purpose Water Hoses are commonly used for water delivery in:-

Railways
Industries
dams
Mines
Horticulture
Irrigation
Fire Fighting
Construction Sites
Car Washing
De-watering etc.

Please provide us the following details at the time of inquiry/order:

Nominal Bore size
Type
Working pressure
External Condition if any (e.g.: Abrasion, Climate Conditions, etc.)
End Connection Details
Roll Length
Total Quantity Required

Make an Inquiry

Overview